Development of stages for assessing labor intensity of research and development in manufacturing enterprises
https://doi.org/10.25206/1813-8225-2025-193-21-29
EDN: ONILYL
Abstract
To produce competitive products, enterprises must engage in research and development activities. This work involves numerous specific factors that significantly complicate the process of labor intensity assessment. Existing labor standardization methods, while potentially applicable for evaluating labor intensity, are not fully adapted for research and development activities. Therefore, it is advisable to develop dedicated stages for assessing the labor intensity of research and development activities, allowing for consideration of all unique factors relevant to these activities.
About the Authors
V. A. Tretyakova
Bauman Moscow State Technical University
Russian Federation
Russian Federation
TRETYAKOVA Victoria Alexandrovna, Candidate of Technical Sciences, Associate Professor of the IBM-3 Logistics of High-tech Industries Department
Moscow
S. S. Voronin
Bauman Moscow State Technical University
Russian Federation
Russian Federation
VORONIN Stepan Stanislavovich, Undergraduate of the IBM3-11M group of the Engineering Business and Management Faculty
Moscow
References
1. Investitsii v issledovaniya i razrabotki [Investments in research and development].URL: https://publications.jrc.ec.europa.eu/repository/handle/JRC135576 (accessed: 15.09.2024). (In Russ.).
2. Burganov R. A. Planirovaniye na predpriyatii [Enterprise planning]. 3rd ed. Saint Petersburg, 2023. 260 p. ISBN 978-5-507-46856-0. (In Russ.).
3. Kozlov Yu. D., Drobot A. N., Kornilova Yu. A. Napravleniya normirovaniya nauchnogo truda pri vypolnenii NIOKR [Directions of scientific labor standardization in R&D]. Vestnik FKU NIIT FSIN Rossii. 2021. Issue 3. P. 123–126. EDN: TNUJPW. (In Russ.).
4. Durnev R. A., Zhdanenko I. V. Otsenka trudoyemkosti nauchno-issledovatel’skikh i opytno-konstruktorskikh rabot v oblasti bezopasnosti zhiznedeyatel’nosti: problemy, idei, podkhody [Evaluation of the Labor Intensity of R&D in Life Safety: Problems, Ideas, Approaches] / Ed. by V. A. Akimov. Moscow, 2012. 256 p. ISBN 978-5-93970-074-0. EDN: PIJBUL. (In Russ.).
5. Feoktistova O. A. Normirovanie nauchno-issledovatelskogo truda: metodologicheskie podkhody [Norm-setting of research work: methodological approaches]. Internet-journal «Naukovedenie». URL: https://naukovedenie.ru/PDF/109EVN514.pdf (accessed: 15.09.2024). (In Russ.).
6. Grineva N. V. Upravlenie riskami v innovatsionnoy deyatelnosti [Risk management in innovative activities]. Vestnik Moskovskogo universiteta. Seriya 6. Ekonomika. Moscow University Economics Bulletin. 2008. No. 6. P. 118–129. EDN: KVEFTZ. (In Russ.).
7. Vasina O. V., Tret’yakova V. A. Normirovaniye nauchnoissledovatel’skikh i opytno-konstruktorskikh rabot [Regulation of R&D]. Upravleniye nauchno-tekhnicheskimi proyektami. Management of Scientific and Technical Projects. 2019. P. 54–61. (In Russ.).
8. Tretyakova V. A. Organizatsiya i normirovanie truda v naukoemkikh proizvodstvakh [Organization and labor standardization in knowledge-intensive production]. Moscow, 78 p. 2018. ISBN 978-5-7038-5061-9. (In Russ.).
9. Orlov A. I. Organizatsionno-ekonomicheskoye modelirovaniye. V 3 ch. Ch. 2. Ekspertnyye otsenki [Organizational and economic modeling. In 3 parts. Part 2. Expert evaluations]. Moscow, 2011. 486 p. (In Russ.).
10. Kornilova A. Yu., Paley T. F. Problemy primeneniya metodov ekspertnykh otsenok v protsesse ekonomicheskogo prognozirovaniya razvitiya predpriyatiya [Issues in applying expert assessment methods in the process of enterprise development forecasting]. Problemy sovremennoy ekonomiki. Problems of Modern Economics. 2010. No. 3. P. 124–128. (In Russ.).
11. Vasina O. V., Kotova P. K., Tret’yakova V. A. Metody normirovaniya nauchno-issledovatel’skikh i opytnokonstruktorskikh rabot [Methods of the R&D standardizing]. E-Scio. 2020. No. 1 (40). P. 331–343. EDN: TGJNLU. (In Russ.).
12. Durnev R. A., Zhdanenko I. V. O proyekte metodiki otsenki trudoyemkosti i stoimosti nauchno-issledovatel’skikh i opytnokonstruktorskikh rabot [About the project of the technique of the assessment of labour input and cost of the R&D]. Tekhnologii grazhdanskoy bezopasnosti. Technologies of Civil Safety. 2014. Vol. 11, no. 2 (40). P. 28–35. EDN: SEPTNF. (In Russ.).
13. Metodicheskiye rekomendatsii po normirovaniyu truda na vypolneniye nauchno-issledovatel’skikh i opytnokonstruktorskikh rabot [Methodological recommendations for labor standardization for R&D]. URL: http://expert275.ru/wp-content/uploads/2017/11/5_МР-по-норм-труда-наНИОКР-13_01_06.pdf (accessed: 15.09.2024). (In Russ.).
14. Sotavov A. K. Otsenka nauchno-tekhnicheskogo urovnya innovatsionnykh proyektov: organizatsionno-upravlencheskiy aspekt [Evaluation of scientific and technological level of innovation projects: organizational-administrative aspect]. Izvestiya SanktPeterburgskogo gosudarstvennogo ekonomicheskogo universiteta. Bulletin of the St. Petersburg State University of Economics. 2016. No. 2 (98). P. 126–130. EDN: VQBADD. (In Russ.).
15. Zainullina M. R., Nabieva L. G., Paley T. F. Organizatsiya i normirovanie truda v otraslyakh neproizvodstvennoy sfery: uchebnoe posobie [Organization and labor standardization in nonproduction sectors: study guide] / Ed. by T. F. Paley. Kazan, 2013. 136 p. (In Russ.).
16. Anikeychik N. D., Kinzhagulov I. Yu., Fedorov A. V. Planirovaniye i upravleniye NIR i OKR [Planning and management of R&D]. Saint Petersburg, 2016. 192 p. (In Russ.).
17. Voronin S. S., Kasarkin K. S., Tret’yakova V. A. Razrabotka printsipov formirovaniya normativnoy bazy dlya otsenki trudoyemkosti NIOKR [Development of principles of normative base formation for estimation of labor intensity of R&D]. Izvestiya Tul’skogo gosudarstvennogo universiteta. Tekhnicheskiye nauki. News of the Tula State University. Technical Sciences. 2023. No. 11. P. 524–528. DOI: 10.24412/2071-6168-2023-11-524-525. EDN: LWPYIF. (In Russ.).
18. Voronin S. S., Kasarkin K. S., Tret’yakova V. A. Etapy razrabotki normativnoy bazy dlya normirovaniya NIOKR [Stages of developing of the regulatory framework for R&D standardization]. Ekonomika i biznes: teoriya i praktika. Economics and Business: Theory and Practice. 2023. No. 7 (101). P. 20–25. DOI: 10.24412/2411-0450-2023-7-20-25. EDN: FONNMO. (In Russ.).
19. Durnev R. A., Zhdanenko I. V. O nekotorykh rezul’tatakh normirovaniya nauchnogo truda [About some results of rationing of scientific work]. Tekhnologii grazhdanskoy bezopasnosti. Civil Security Technologies. 2014. Vol. 11, no. 1 (39). P. 4–11. EDN: SBDQTH. (In Russ.).
20. Velichko E. A., Davydovskiy F. N. Metodicheskiye osnovy planirovaniya trudoyemkosti izgotovleniya tovarnoy produktsii sudostroitel’nykh predpriyatiy [Methodical bases of planning complexity of the manufacture of commercial products shipyards]. Mezhdunarodnyy zhurnal eksperimental’nogo obrazovaniya. International Journal of Experimental Education. 2016. No. 9-2. P. 269–273. EDN: WLBAKF. (In Russ.).
Review
For citations:
Tretyakova V.A., Voronin S.S. Development of stages for assessing labor intensity of research and development in manufacturing enterprises. Omsk Scientific Bulletin. 2025;(1):21-29. (In Russ.) https://doi.org/10.25206/1813-8225-2025-193-21-29. EDN: ONILYL
Views:
3
JATS XML
Email this article 