Search for optimal parameters of wire electrical discharge machining of parts made from E110 zirconium alloy
https://doi.org/10.25206/1813-8225-2025-193-38-49
EDN: YJFNSI
Abstract
The article proposes a method for calculating rational parameters of wire electrical discharge machining of zirconium alloy E110 using a rotatable central composite design of the second order. The influence of key processing factors such as pulse duration, inter-pulse pause, and spark gap voltage on the thickness of the recast layer and machining time is examined. The feasibility of using regression models for predicting processing parameters and optimizing their values is demonstrated. The obtained results are applicable for enhancing the productivity and quality of machining complex parts in medical, aviation, and other industrial sectors.
About the Authors
N. V. Bobkov
Omsk State Technical University
Russian Federation
Russian Federation
BOBKOV Nikolay Vladimirovich, Senior Lecturer of the Mechanical Engineering Technology Department
AuthorID (RSCI): 819427
AuthorID (SCOPUS): 57194829384
ResearcherID: S-1503-2016
Omsk
A. A. Fedorov
Omsk State Technical University
Russian Federation
Russian Federation
FEDOROV Aleksey Arkadyevich, Candidate of Technical Sciences, Associate Professor of the Mechanical Engineering Technology Department
AuthorID (RSCI): 610896
AuthorID (SCOPUS): 57193509299
ResearcherID: A-7188-2014
Omsk
S. V. Petrochenko
Ningbo Intelligent Machine Tool Research Institute Co., Ltd. of China National Machinery Industry Institute Group
China
China
PETROCHENKO Sergei Valeryevich, Candidate of Technical Sciences, Associate Professor, R&D Director
AuthorID (RSCI): 648136
AuthorID (SCOPUS): 57983962200
ResearcherID: A-8009-2014
Ningbo
N. S. Artemenko
Omsk State Technical University
Russian Federation
Russian Federation
ARTEMENKO Nikita Sergeyevich, Graduate Student of the Metal Cutting Machines and Tools Department, Engineer at the «Modern Manufacturing Technologies» Research and Production Center
Omsk
R. V. Chulkov
Omsk State Technical University
Russian Federation
Russian Federation
CHULKOV Roman Vasilyevich, Student at gr. KTO-231 of the Mechanical Engineering Institute
Omsk
References
1. Sultanov A. A., Pervov Yu. Yu., Yatsenko A. K. Fizikokhimicheskiye svoystva implantatov i ikh vzaimodeystviye s okruzhayushchimi tkanyami i sredami polosti rta (obzorliteratury) [Physical and chemical properties of implants, their interaction with surrounding tissues and environments of the oral cavity (literature review)]. Vyatskiy meditsinskiy vestnik. Medical Newsletter of Vyatka. 2019. No. 2 (62). P. 80–86. EDN: WRSCOO. (In Russ.).
2. Koteneva M. V., Nikulin S. A., Rozhnov A. B. Vliyaniye usloviy okisleniya na strukturu i razrusheniye oksidnykh plenok tsirkoniyevykh splavov [Influence of oxidation conditions on the structure and degradation of oxide films on zirconium alloys]. Prochnost’ neodnorodnykh struktur–PROST 2018. Strength of Heterogeneous Structures–PROST 2018. 2018. P. 182–182. EDN: XNETRB. (In Russ.).
3. Kulyashova K. S. Zakonomernosti formirovaniya mikrodugovykh kal’tsiy-fosfatnykh biopokrytiy na poverkhnosti tsirkoniya i ikh svoystva [Regularities in the formation of micro arc calcium phosphate bio coatings on zirconium surface and their properties]. Tomsk, 2011. 162 p. (In Russ.).
4. Popov I. S., Borisenko K. G. Elektroerozionnaya obrabotka kak odin iz perspektivneyshikh metodov obrabotki metalla [Electrical discharge machining as one of the most promising methods for metal processing]. Yunost’ i Znaniya — Garantiya Uspekha-2018. Youth and Knowledge — Guarantee of Success-2018. In 2 vols. 2018. Vol. 2. P. 259–267. EDN: YNESIP. (In Russ.).
5. Siddiqui M. M. U. Z., Iqbal S. A., Zulqarnainet A. [et al.]. An investigative study on the parameters optimization of the electric discharge machining of Ti6Al4V. Clean Technologies and Recycling. 2024. Vol. 4, Issue 1. P. 43–60. DOI: 10.3934/ctr.2024003. (In Engl.).
6. Mohanraj T., Thenarasu M., Ragaventhra B. S. [et al.]. Parameter optimization in wire electrical discharge machining using bio–inspired algorithms and response surface methodology. International Journal on Interactive Design and Manufacturing (IJIDeM). 2024. P. 1–28. DOI: 10.1007/s12008-024-01936-6. (In Engl.).
7. Bobkov N. V., Fedorov A. A., Polonyankin D. A. [et al.]. Issledovaniye vliyaniya rezhimov provolochno-vyreznoy elektroerozionnoy obrabotki na morfologiyu, sherokhovatost’ i treshchinoobrazovaniye poverkhnosti tugoplavkikh metallov [Investigation of the influence wedm on morphology, roughness and cracking of surfaces refractory metals]. Dinamika sistem, mekhanizmov i mashin. Dynamics of Systems, Mechanisms and Machines. 2018. Vol. 6, no. 1. P. 148–154. DOI: 10.25206/2310-9793-2018-6-1-148-154. EDN: VLXWHK. (In Russ.).
8. Anwar H., Shather S. K., Khudhir W. S. WEDM Process Parameters Analysis and Optimization: A Review. Salud, Ciencia y Tecnología — Serie de Conferencias. 2024. No. 3. 860. DOI: 10.56294/sctsonf2024860. (In Engl.).
9. Bobkov N. V., Fedorov A. A., Bredgauer Yu. O. [etal.]. Issledovaniye rasprostraneniya polya temperature vglub’ tsirkoniyevoy zagotovki pri provolochno-vyreznoy elektroerozionnoy obrabotke [Study of temperature field propagation into zirconium billet during wire-cut EDM]. Rossiya Molodaya: Peredovyye Tekhnologii — v Promyshlennost’. 2023. P. 25–30. DOI: 10.25206/2310-4597-2023-1-25-30. EDN: AIQHLM. (In Russ.).
10. Asoo H. R., Alakali J. S., Ikya J. K. [et al.]. Historical background of RSM // Response Surface Methods–Theory, Applications and Optimization Techniques. IntechOpen, 2024. DOI: 10.5772/intechopen.1005302. (In Engl.).
11. Erunova I. B., Ushakov I. E. Matematicheskiye aspekty formirovaniya kriteriyev optimal’nosti pri planirovanii eksperimentov [Mathematical aspects of the formation of optimality criteria in the planning of experiments]. Sovremennoye obrazovaniye: soderzhaniye, tekhnologii, kachestvo. Modern Education: Content, Technologies, Quality. 2019. Vol. 1. P. 131–133. EDN: WCNOTH. (In Russ.).
12. Gushchin A. V. Metody planirovaniya eksperimenta i vybor grupp s lineynymi kharakteristikami vzaimodeystviya [Methods of experiment planning and selection of groups with linear interaction characteristics]. Vestnik SamGUPS. 2021. No. 1(51). P. 97–103. EDN: GAXAXP. (In Russ.).
13. Tsitsiashvili G. Sh., Osipova M. A., Gudimenko A. I. Planirovaniye eksperimenta dlya otsenki parametrov differentsial’nykh uravneniy po netochnym nablyudeniyam [Planning an experiment to estimate the parameters of differential equations based on inaccurate observations]. Vestnik Voronezhskogo gosudarstvennogo universiteta. Seriya: Sistemnyy analiz i informatsionnyye tekhnologii. Proceedings of Voronezh State University. Series: Systems Analysis and Information Technologies. 2024. No. 1. P. 28–35. DOI: 10.17308/sait/1995-5499/2024/1/28-35. EDN: KUSYWC. (In Russ.).
14. Giorleo L., Previtali B., Semeraro Q. Modelling of back tempering in laser hardening // The International Journal of Advanced Manufacturing Technology. 2011. Vol. 54 (9). P. 969–977. DOI: 10.1007/s00170-010-3008-5. (In Engl.).
Review
For citations:
Bobkov N.V., Fedorov A.A., Petrochenko S.V., Artemenko N.S., Chulkov R.V. Search for optimal parameters of wire electrical discharge machining of parts made from E110 zirconium alloy. Omsk Scientific Bulletin. 2025;(1):38-49. (In Russ.) https://doi.org/10.25206/1813-8225-2025-193-38-49. EDN: YJFNSI
Views:
7
JATS XML
Email this article 