Prospects for development of graphic training of students of technical universities
https://doi.org/10.25206/1813-8225-2023-186-67-72
Abstract
This article discusses the possibility of developing graphic training for students of technical specialties in the field of information modeling (building information modeling). Currently, building information modeling are an integral part of the construction industry all over the world, and the process of implementation in the Russian Federation is underway to maintain the competitiveness of developers both in the domestic market and in construction abroad. In parallel with the introduction in the construction sector, there are attempts to adapt information modeling in other industries. Against this background, the demand for specialists in the field of information modeling has increased, employees have to retrain not only to work with new software, but also to move away from individual creativity of individual employees or departments to collective work on one project simultaneously by all employees from their workplaces (perhaps even from different cities and countries). In parallel with this, various software being created in the field of information modeling, both in Russia and abroad, most of them are initially aimed at construction, but there are also adaptation options for other fields of activity.
In this regard, the issue of actual graphic training of modern specialists has arisen: now it is not enough to teach students to create drawings using CAD and read design documentation, but it is necessary to immediately prepare students for collective creativity, responsibility to the team for the changes made to the project, and most importantly — to show the principles of work in a software product for information modeling.
About the Author
Zh. A. Nazarova
Urals State Transport University
Russian Federation
Russian Federation
NAZAROVA Zhanna Anatolyevna, Candidate of Pedagogical Sciences, Associate Professor of Vehicle Design and Operation Departm
Ekaterinburg
References
1. Savel’yev Yu. A., Cherkasova E. Yu. Vychislitel’naya grafika v reshenii netraditsionnykh inzhenernykh zadach [Computational graphics in solving of non-traditional engineering problems] // Geometriya i grafika. Geometry and Graphics. 2020. Vol. 8, no. 1. P. 33–44. DOI: 10.12737/2308-4898-2020-33-44. EDN YBMQZU. (In Russ.).
2. Sedlets’ka O. V. Prototip real’nikh sporud v іnzhenernіy grafіtsі [Prototype of real structures in engineering graphics] // Vіsnik Pridnіprovs’koї derzhavnoї akademії budіvnitstva ta arkhіtekturi. Bulletin of the Prydniprovska State Academy of Civil Engineering and Architecture. 2020. No. 2 (263-264). P. 79–85. DOI: 10.30838/J.BPSACEA.2312.280420.91.624. EDN AMFCUY. (In Ukr.).
3. Marinin A. N. Problemy ispol’zovaniya tekhnologii BIM v mostostroyenii [Problems of using bim technology in bridge engineering] // Elektronnyy setevoy politematicheskiy zhurnal «Nauchnyye trudy KubGTU». Electronic Online Multidisciplinary Journal «Scientific Proceedings of Kuban State Technical University». 2020. No. 8. P. 711–718. EDN TMCBOK. (In Russ.).
4. Doronin V. Yu., Matyushkin D. N. Vnedreniye 4D modelirovaniya v praktiku deyatel’nosti stroitel’noy organizatsii [Introduction of 4D modeling into the practice of a construction organization] // Mezhdunarodnyy zhurnal informatsionnykh tekhnologiy i energoeffektivnosti. International Journal of Information Technology and Energy Efficiency. 2022. Vol. 7, no. 3-2 (25). P. 42–45. EDN WJBUGK. (In Russ.).
5. Ob utverzhdenii Plana poetapnogo vnedreniya tekhnologiy informatsionnogo modelirovaniya v oblasti promyshlennogo i grazhdanskogo stroitel’stva: prikaz Minstroya Rossii ot 24 dekabrya 2014 g., № 926/pr. [On Approval of the Plan for Phased Implementation of Information Modeling Technologies in Industrial and Civil Construction: Order of the Russian Ministry of Construction dated 24 December 2014, No. 926/pr]. URL: http://www.minstroyrf.ru/upload/iblock/383/prikaz-926pr.pdf (accessed: 28.02.2023). (In Russ.).
6. Fontokina V. A., Savenko A. A., Samarskiy E. D. Rol’ BIMtekhnologiy v organizatsii i tekhnologii stroitel’stva [The role of BIM technologies in the construction economy] // Vestnik evraziyskoy nauki. The Eurasian Scientific Journal. 2022. Vol. 14, no. 1. EDN IPTBYB. (In Russ.).
7. Talapov V. V. Osnovy BIM: vvedeniye v informatsionnoye modelirovaniye zdaniy [BIM basics: an introduction to building information modelling]. Moscow, 2011. 392 p. (In Russ.).
8. Talapov V. V. O nekotorykh printsipakh, lezhashchikh v osnove BIM [Some of the principles underlying the BIM] // Izvestiya vysshikh uchebnykh zavedeniy. Stroitel’stvo. News of Higher Educational Institutions. Construction. 2016. No. 4 (688). P. 108–114. (In Russ.).
9. Rybin E. N., Ambaryan S. K., Anosov V. V. [et al.]. BIMtekhnologii [Bim technology] // Izvestiya vuzov. Investitsii. Stroitel’stvo. Nedvizhimost’. Proceedings of Universities. Investment. Construction. 2019. No. 9 (1). P. 98–105. EDN HLTTRU. (In Russ.).
10. Apatova N. V., Uzakov T. K. Vliyaniye informatsionnykh tekhnologiy v stroitel’stve na ekonomicheskiy rost [Influence of information technologies in construction on economic growth] // Ekonomika stroitel’stva i prirodopol’zovaniya. Construction economic and environmental management. 2018. No. 4 (69). P. 17–24. EDN VXHXUU. (In Russ.).
11. Bayoris A. R., Malinovskiy M. A., Ershov A. V. BIM-modelirovaniye kak tekhnologiya povysheniya konkurentnosposobnosti stroitel’noy otrasli [BIM-modeling as a technology to increase the competitiveness of the construction industry] // Regulirovaniye zemel’no-imushchestvennykh otnosheniy v Rossii: pravovoye i geoprostranstvennoye obespecheniye, otsenka nedvizhimosti, ekologiya, tekhnologicheskiye resheniya. Regulation of Land and Property Relations in Russia: Legal and Geospatial Support, Real Estate Valuation, Ecology, Technological Solutions. 2021. No. 1. P. 79–83. DOI: 10.33764/2687-041X-2021-1-79-83. EDN YBFPSF. (In Russ.).
12. Gorodnova N. V., Shablova E. G. Primeneniye informatsionnykh tekhnologiy v kontseptsii razvitiya gorodov: ekonomiko-pravovyye aspekty [The use of information technologies in the concept of urban development: economic and legal aspects] // Zhilishchnyye strategii. Russian Journal of Housing Research. 2019. No. 3. P. 277–294. DOI: 10.18334/zhs.6.3.40892. (In Russ.).
13. Gorodnova N. V., Lemeza V. A. Primeneniye BIMtekhnologiy v tsifrovoy ekonomike: mirovoy opyt i rossiyskaya praktika [BIM technologies in the digital economy: world experience and Russian practice] // Ekonomika, predprinimatel’stvo i pravo. Journal of Economics, Entrepreneurship and Law. 2022. Vol. 12, no. 8. P. 2241–2260. DOI: 10.18334/epp.12.8.115082. EDN: XSISOS. (In Russ.).
14. Mikhaylova A. V., Surkov A. A. Primeneniye BIMtekhnologiy v stroitel’noy otrasli [application of BIM – technologies in the construction industry] // Khimiya. Ekologiya. Urbanistika. Chemistry. Ecology. Urbanistics. 2021. Vol. 1. P. 63– 67. EDN JGXRKL. (In Russ.).
15. Nikolayeva A. I. BIM-tekhnologii, kak element sovremennogo stroitel’stva [BIM technology as an element of modern construction] // Evraziyskiy Soyuz Uchenykh. Seriya: tekhnicheskiye i fiziko-matematicheskiye nauki. Eurasian Union of Scientists. Series: Technical, Physical and Mathematical Sciences. 2021. No. 11 (92). P. 27–31. DOI: 10.31618/ESU.2413-9335.2021.1.92.1509. EDN ZKHLML. (In Russ.).
16. Gevara Rada L. T., Peshkov V. V., Mart’yanov V. I. [et al.] Tekhnologii informatsionnogo modelirovaniya (BIM) kak osnova berezhlivogo stroitel’stva [Building Information Modelling (BIM) technology as a basis for lean construction] // Izvestiya Vuzov. Investitsii. Stroitel’stvo. Nedvizhimost’. Proceedings of Universities. Investment. Construction. 2022. Vol. 12, no. 1 (40). P. 70–81. DOI: 10.21285/2227-2917-2022-1-70-81. EDN TDEUOH. (In Russ.).
17. Kupriyanovskiy V. P., Pokusayev O. N., Klimov A. A. [et al.]. BIM na zheleznykh dorogakh mira — razvitiye, primery, standarty [BIM on the world's railways — developments, examples and standards] // International Journal of Open Information Technologies. International Journal of Open Information Technologies. 2020. Vol. 8, no. 5. P. 57–80. EDN XXOLBZ. (In Russ.).
18. Tekhnologii nastoyashchego: BIM dlya promyshlennykh ob”yektov [Technologies of the present: BIM for industrial facilities]. URL: https://neftegaz.ru/science/tsifrovizatsiya/672306-tekhnologii-nastoyashchego-bim-dlya-promyshlennykh-obektov/ (accessed: 28.02.2023). (In Russ.).
19. Kakoye programmnoye obespecheniye (PO) realizuyet tekhnologiyu BIM? [Which software implements BIM technology?]. URL: https://bimlab.ru/faq-bim-soft.html (accessed: 28.02.2023). (In Russ.).
20. Luchshiye programmy BIM modelirovaniya dlya arkhitektorov i dizaynerov [The best BIM modelling software for architects and designers]. URL: https://3dradar.ru/post/47794/ (accessed: 28.02.2023). (In Russ.).
21. Programmy dlya BIM-proyektirovaniya [BIM design programmes]. URL: https://www.pss.spb.ru/stati/programmydlya-bim-proektirovaniya.html (accessed: 28.02.2023). ). (In Russ.).
22. Top-10 programm dlya BIM proyektirovaniya [Top 10 BIM design programmes]. URL: https://www.planradar.com/ru/top-10-programm-dlya-bim-proektirovaniya/ (accessed: 28.02.2023). (In Russ.).
23. Model StudioCS Stroitel’nyye resheniya [Model Studio CS Building Solutions]. URL: https://www.mscad.ru/programs/mscad-aec.html (accessed: 28.02.2023). (In Russ.).
24. Programmy dlya BIM proyektirovaniya — spisok zarubezhnykh i rossiyskikh SAPR, ispol’zuyushchikh razrabotki BIM-tekhnologii [BIM software — list of foreign and Russian CAD systems that use BIM developments]. URL: https://www.zwsoft.ru/stati/programmy-dlya-bim-proektirovaniya--spisok--zarubezhnyh-i-rossiyskih-sapr-ispolzuyushchih--razrabotki-bimtehnologii (accessed: 28.02.2023). (In Russ.).
25. Top-4 otechestvennykh BIM-programm v sfere stroitel’stva [Top 4 domestic BIM programmes in construction]. URL: https://digital-build.ru/top-4-otechestvennyh-bim-reshenij-v-sferestroitelstva/ (accessed: 28.02.2023). (In Russ.).
26. Baklushina I. V., Usova A. V., Boykova A. V. Osobennosti ispol’zovaniya tekhnologii informatsionnogo modelirovaniya (BIM-tekhnologii) na primere programmnogo obespecheniya Revit [Features of the use of Building Information Modelling (BIM) technology, using Revit software as an example] // Tendentsii razvitiya nauki i obrazovaniya. Trends in the Development of Science and Education. 2020. No. 62-5. P. 80–83. DOI: 10.18411/lj-06-2020-103. EDN HBEFEV. (In Russ.).
27. Usova A. V. Osobennosti Revit, kak informatsionnogo modelirovaniya (BIM-tekhnologii) [Features of Revit as information modelling (BIM technology)] // Tendentsii razvitiya nauki i obrazovaniya. Trends in the Development of Science and Education. 2022. No. 85-3. P. 40–43. DOI: 10.18411/trnio-05-2022-103. EDN QSPWXY. (In Russ.).
Review
For citations:
Nazarova Zh.A. Prospects for development of graphic training of students of technical universities. Omsk Scientific Bulletin. 2023;(2):67-72. (In Russ.) https://doi.org/10.25206/1813-8225-2023-186-67-72
Views:
7
JATS XML
Email this article 