Analysis of quality management in digital production design and technological preparation

The article is devoted to the analysis of the current state of quality management of design and technological training of digital productions. The main trends and challenges facing enterprises in the context of the transition to digital technologies are considered. The main attention is paid to the research of methods and tools used for quality management of design and technological preparation of production facilities, such as the introduction of PLM systems, the use of Industry 4.0 technologies. The groups of problems that arise during digitalization in the quality management of design and technological training of production are described. Promising research directions necessary for further development of the quality management level of design and technological preparation of production facilities have been identified.

1. Vasiliev V. A., Alexandrova S. V., Letuchev G. M. Tsifrovyye tekhnologii v upravlenii kachestvom [Digital technologies in quality management]. Idei i novatsii. Ideas and Innovations. 2022. Vol. 10, no. 1-2. P. 125–129. DOI: 10.48023/2411-7943_2022_10_1-2_125. EDN: DWECHO. (In Russ.).

2. Leon K. S., Porsev K. I. O kachestve konstruktorskotekhnologicheskoy podgotovki tsifrovogo mashinostroitel’nogo proizvodstva [On the quality of design and technological preparation of digital engineering production] // Rol’ tekhnicheskogo regulirovaniya i standartizatsii v epokhu tsifrovoy ekonomiki. Ekaterinburg, 2024. P. 127–130. EDN: NFVAOP. (In Russ.).

3. Vasiliev V. A., Alexandrova S. V. Upravleniye kachestvom naukoyemkikh protsessov [Quality management of knowledgebased processes]. Naukoyemkiye tekhnologii v mashinostroyenii. Science Intensive Technologies in Mechanical Engineering. 2024. No. 9 (159). P. 33–41. DOI: 10.30987/2223-4608-2024-33-41. EDN: AFWCZX. (In Russ.).

4. Krasnoramensky A. S. Transformatsiya sistemy menedzhmenta kachestva v usloviyakh tsifrovizatsii ekonomiki [Transformation of the quality management system in the context of the digitalization of the economy] // Ekonomika. Biznes. Innovatsii. Penza, 2021. P. 35–37. (In Russ.).

5. Korovkin V. V., Kuznetsova G. V. Perspektivy tsifrovoy transformatsii rossiyskogo mashinostroyeniya [Prospects for digital transformation in russian machine building industry]. Ars Administrandi (Iskusstvo upravleniya). Ars Administrandi (The Art of Governance). 2020. Vol. 12, no. 2. P. 291–313. DOI: 10.17072/2218-9173-2020-2-291-313. EDN: NXNOXM. (In Russ.).

6. Negodin Yu. A., Negodin E. A. Tsifrovoye modelirovaniye proizvodstvennogo protsessa v tyazhelom mashinostroyenii [Digital modeling of the production process in heavy engineering]. Mekhaniki XXI veku. 2023. № 22. С. 90–93. EDN: OOGKQF. (In Russ.).

7. Leng J., Wang D., Shen W. [et al.]. Digital twins-based smart manufacturing system design in Industry 4.0: a review. Journal of Manufacturing Systems. 2021. Vol. 60. P. 119–137. DOI: 10.1016/j.jmsy.2021.05.011.

8. Maretto L., Faccio M., Battini D. The adoption of digital technologies in the manufacturing world and their evaluation: a systematic review of real-life case studies and future research agenda. Journal of Manufacturing Systems. 2023. Vol. 68. P. 576– 600. DOI: 10.1016/j.jmsy.2023.05.009.

9. Kuleva N. I., Stepanov A. S. Aktualizatsiya sistemy menedzhmenta kachestva predpriyatiya pri sozdanii informatsionnogo prostranstva konstruktorsko-tekhnologicheskoy podgotovki proizvodstva [Updating the quality management system of an enterprise when creating an information space for design and technological preparation of production] // Upravleniye kachestvom na etapakh zhiznennogo tsikla tekhnicheskikh i tekhnologicheskikh system. Kursk, 2020. P. 131–134. EDN: AZOKTL. (In Russ.).

10. Antipova O. I., Khaimovich I. N., Chekmarev A. N., Churilin S. V. Upravleniye kachestvom konstruktorsko-tekhnologicheskoy podgotovki proizvodstva s ispol’zovaniyem bazovoy kontseptual’noy modeli dannykh [Quality management of design and technology preproduction using a basic conceptual data model]. Vestnik Samarskogo munitsipal’nogo instituta upravleniya. Bulletin of Samara Municipal Institute of Management. 2020. No. 1. P. 7–19. EDN: DBPCFT. (In Russ.).

11. Kovrigin E. A. Integratsiya sovremennykh tsifrovykh tekhnologiy v sistemu menedzhmenta kachestva vysokotekhnologichnykh predpriyatiy [Integration of modern digital technologies into the quality management system of high-tech enterprises]. Moscow, 2020. 144 p. (In Russ.).

12. Strelkov G. S. Primeneniye tsifrovykh tekhnologiy proyektirovaniya v mashinostroyenii: aktual’noye sostoyaniye i perspektivy [Application of digital design technologies in mechanical engineering: current state and prospects]. Izvestiya Tul’skogo gosudarstvennogo universiteta. Tekhnicheskiye nauki. Proceedings of the Tula State University. Technical science. 2024. No. 7. P. 132–134. DOI: 10.24412/2071-6168-2024-7-132-133. EDN: TRVDWN. (In Russ.).

13. Mantravadi S., Moller C. An overview of next-generation manufacturing execution systems: how important is MES for industry 4.0? Procedia manufacturing. 2019. Vol. 30. P. 588–595. DOI: 10.1016/j.promfg.2019.02.083.

14. Huang G., Hu J., He Y. [et al.]. Machine learning for electronic design automation: A survey. ACM Transactions on Design Automation of Electronic Systems (TODAES). 2021. Vol. 26, no. 5. P. 1–46. DOI: 10.48550/arXiv.2102.03357.

15. Adeyeye O. J., Akanbi I. Artificial intelligence for systems engineering complexity: a review on the use of ai and machine learning algorithms. Computer Science & IT Research Journal. 2024. Vol. 5, no. 4. P. 787–808. DOI: 10.51594/csitrj.v5i4.1026.

16. Okuyelu O., Adaji O. AI-driven real-time quality monitoring and process optimization for enhanced manufacturing performance. Journal of Advances in Mathematics and Computer Science. 2024. Vol. 39, no. 4. P. 81–89. DOI: 10.9734/jamcs/2024/v39i41883.

17. Hu Y. Industrial Internet of things intelligence empowering smart manufacturing: a literature review. IEEE Internet of Things Journal. 2024. DOI: 10.1109/JIOT.2024.3367692.

18. Ho P. T. Study of augmented reality based manufacturing for further integration of quality control 4.0: a systematic literature review. Applied Sciences. 2022. Vol. 12, no. 4. P. 1961. DOI: 10.3390/app12041961.

19. Husar J., Knapčíková L. Implementation of augmented reality in smart engineering manufacturing: a literature review. Mobile Networks and Applications. 2024. Vol. 29, no. 1. P. 119–132. DOI: 10.1007/s11036-023-02121-x.

20. Nikolskaya V. A., Koshkina G. V., Nikolsky S. V. Sistema upravleniya personalom v kontseptsii sistemy menedzhmenta kachestva [The personnel management system in the concept of a quality management system]. Vestnik Tverskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Nauki ob obshchestve i gumanitarnyye nauki. Bulletin of Tver State Technical University. Series: Sciences of Society and Humanities. 2024. No. 3 (38). P. 76–80. DOI: 10.46573/2409-1391-2024-3-76-80. EDN: BHJVNK. (In Russ.).

21. Spiridonov O. V. Trebovaniya k kvalifikatsii rabochikh mashinostroitel’noy promyshlennosti v usloviyakh tsifrovoy transformatsii [Requirements for the qualification of workers in the machine-building industry in the context of digital transformation]. Vektor ekonomiki. Vector Economy. 2020. No. 1 (43). P. 88. EDN: RHBPWE. (In Russ.).

22. Spiridonov O. V. Podgotovka vysokokvalifitsirovannykh rabochikh v mashinostroyenii v sootvetstvii s trebovaniyami professional’nykh standartov [Training of highly qualified workers in mechanical engineering in accordance with the requirements of professional standards] // Innovatsii v tekhnologiyakh i obrazovanii. Innovations in technology and education. Belovo, 2020. P. 149–154. EDN: JIERHR. (In Russ.).

23. Zaitsev A. V., Spiridonov A. V. Tsifrovoy funktsional inzhenera-tekhnologa v mashinostroyenii [Engineer-technology in mechanical engineering digital functional]. Informatsionnyye tekhnologii. Problemy i resheniya. Information Technology. Problems and solutions. 2020. No. 3 (12). P. 24–29. EDN: SSBTMR. (In Russ.).

24. Shemshurina S. A. Kompetentsiya personala v sisteme menedzhmenta kachestva [The competence of personnel in the quality management system]. Vestnik Volzhskogo universiteta im. V. N. Tatishcheva. Vestnik of Volzhsky University named after V. N. Tatishchev. 2016. Vol. 2, no. 3. P. 214–221. EDN: WVQNIJ. (In Russ.).

25. Churilin S. V., Khaimovich S. V. Konflikt interesov pri vnedrenii informatsionnykh tekhnologiy v konstruktorskotekhnologicheskuyu podgotovku proizvodstva [Conflict of interests in the implementation of information technologies in the design and technological preparation of production]. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk. Izvestia of Samara Scientific Center of the Russian Academy of Sciences. 2020. Vol. 22, no. 5 (97). P. 36–40. DOI: 10.37313/19905378-2020-22-5-36-40. EDN: LKVEVW. (In Russ.).

26. Sader S., Husti I., Daroczi M. A review of quality 4.0: definitions, features, technologies, applications, and challenges. Total Quality Management & Business Excellence. 2022. Vol. 33, no. 9–10. P. 1164–1182. DOI: 10.1080/14783363.2021.1944082.

27. Gorokhova K. V. Perspektivy razvitiya sistemy menedzhmenta kachestva [Quality management system development prospects]. Uchenyye zapiski Sankt-Peterburgskogo im. V. B. Bobkova filiala. Scientific Letters of Russian Customs Academy St. Petersburg Branch named after Vladimir Bobkov. 2021. No. 2 (78). P. 78–82. (In Russ.).