The problem of reduction of geometry and graphic training departments in Russian universities
https://doi.org/10.25206/1813-8225-2023-188-29-37
EDN: WKFUZV
Abstract
In the article the authors raised the problem of reduction of geometry-graphic training departments in Russian universities, which for the last 16 years amounted to about 1/3. The reasons for this situation are considered, among which should be emphasized the lack of highly qualified personnel of higher qualification, capable of leading scientific schools in the profile of geometric-graphic training departments. It is proposed to activate the work of the departments of geometry-graphic training on training of scientific-pedagogical staff of higher qualification in postgraduate and doctoral studies. It is also proposed to fix for engineering specialties at the level of the state standard the necessary labor intensity and more stringent requirements to the staff conditions for the implementation of the basic professional educational program with regard to the disciplines of geometric-graphic training of students.
About the Authors
S. I. Rotkov
Nizhny Novgorod State University of Architecture and Civil Engineering
Russian Federation
Russian Federation
Sergey I. Rotkov - Doctor of Technical Sciences, Professor, Head of Engineering Geometry, Computer Graphics and Computer-Aided Design Department, Nizhny Novgorod State University of Architecture and Civil Engineering (NNGASU).
Nizhny Novgorod
AuthorID (SCOPUS) 55533401900
E. V. Konopatskiy
Nizhny Novgorod State University of Architecture and Civil Engineering
Russian Federation
Russian Federation
Evgeniy V. Konopatskiy - Doctor of Technical Sciences, Associate Professor, Professor of Engineering Geometry, Computer Graphics and Computer-Aided Design Department, NNGASU.
Nizhny Novgorod
AuthorID (SCOPUS) 57188826034
ResearcherID D-3235-2019
K. L. Panchuk
Omsk State Technical University
Russian Federation
Russian Federation
Konstantin L. Panchuk - Doctor of Technical Sciences, Associate Professor, Professor of Engineering Geometry and CAD Department, Omsk State Technical University.
Omsk
AuthorID (SCOPUS) 55857766100
ResearcherID S-2788-2017
References
1. O realizatsii Natsional'noy tekhnologicheskoy initsiativy: Postanovleniye Pravitel'stva RF ot 18.04.2016 № 317 (red. ot 13.07.2022) [On the implementation of the National Technological Initiative: Resolution of the Government of the Russian Federation of 18.04.2016 No. 317 (ed. of 13.07.2022)]. URL: https://nti2035.ru/documents/docs/%D0%9F%D0%BE%D1%81%D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BB%D0%B5%D0%BD%D0%B8%D0%B5%20%D0%9F%D1%80%D0%B0%D0%B2%D0%B8%D1%82%D0%B5%D0%BB%D1%8C%D1%81%D1%82%D0%B2%D0%B0%20%D0%A0%D0%A4%20%D0%BE%D1%82%2018.04.2016%20%E2%84%96%20317%20%D0%B2%20%D1%80%D0%B5%D0%B4%D0%B0%D0%BA%D1%86%D0%B8%D0%B8%20%D0%BE%D1%82%2013.07.2022.pdf (accessed: 10.05.2023). (In Russ.).
2. O natsional'nykh tselyakh razvitiya Rossiyskoy Federatsii na period do 2030 goda: Ukaz Prezidenta Rossiyskoy Federatsii ot 21.07.2020 № 474 [On the national development goals of the Russian Federation for the period until 2030: Decree of the President of the Russian Federation of 21.07.2020 No. 474]. URL: http://publication.pravo.gov.ru/Document/View/0001202007210012 (accessed: 10.05.2023). (In Russ.).
3. Atanasyan L. S., Butuzov V. F., Kadomtsev S. B. [et al.]. Geometriya. 10—11 klassy [Geometry. 10—11 grades]. Moscow, 2013. 255 p. (In Russ.).
4. Perechen' porucheniy po itogam zasedaniya Prezidiuma Gosudarstvennogo Soveta [List of instructions following the results of the meeting of the Presidium of the State Council.]. URL: http://www.kremlin.ru/acts/assignments/orders/71297 (accessed: 10.07.2023). (In Russ.).
5. Rotkov S. I. Problemy konsolidatsii deyatel'nosti kafedr geometrii i grafiki [Problems of consolidating the activities of the Departments of Geometry and Graphics] // Problemy kachestva graficheskoy podgotovki studentov v tekhnicheskom vuze: traditsii i innovatsii. Problems of Quality of Graphic Training of Students in Technical University: Traditions and Innovations. Perm, 2014. P. 95-103. (In Russ.).
6. Rotkov S. I., Zhilina N. D. Podgotovka kadrov vysshey kvalifikatsii po spetsial'nosti 05.01.01 «Inzhenernaya geometriya i komp'yuternaya grafika» [Training of personnel of higher qualification on specialty 05.01.01 «Engineering Geometry and Computer Graphics»] // Problemy kachestva graficheskoy podgotovki studentov v tekhnicheskom vuze: traditsii i innovatsii. Problems of Quality of Graphic Training of Students in Technical University: Traditions and Innovations. Perm, 2015. Vol. 1. P. 90-98. (In Russ.).
7. O sopryazhenii nauchnykh spetsial'nostey nomenklatury, utverzhdennoy prikazom Minobrnauki Rossii ot 24 fevralya 2021 g. № 118, nauchnykh spetsial'nostey nomenklatury, utverzhdennoy prikazom Minobrnauki Rossii ot 23 oktyabrya 2017 g. № 1027: Rekomendatsiya Prezidiuma VAK Minobrnauki Rossii ot 10.12.2021 № 32/1-NS [On the conjugation of scientific specialties of the nomenclature approved by the order of the Ministry of Education and Science of Russia from February 24, 2021 No. 118, scientific specialties of the nomenclature approved by the order of the Ministry of Education and Science of Russia from October 23, 2017 No. 1027: Recommendation of the Presidium of the Higher Attestation Commission of the Ministry of Education and Science of Russia from 10.12.2021 No. 32/1-NS]. URL: https://fgosvo.ru/files/files/Rekomendation_VAK_32_1_10122021.pdf (accessed: 17.07.2023). (In Russ.).
8. Velikhov E. P., Betelin V. B., Kushnirenko A. G. Promyshlennost', innovatsii, obrazovaniye i nauka v Rossii [Industry, Innovation, Education and Science in Russia]. Moscow, 2009. 140 p. (In Russ.).
9. Perechen' retsenziruyemykh nauchnykh izdaniy, v kotorykh dolzhny byt' opublikovany osnovnyye nauchnyye rezul'taty dissertatsiy na soiskaniye uchenoy stepeni kandidata nauk, na soiskaniye uchenoy stepeni doktora nauk [List of peer- reviewed scientific editions, in which the main scientific results of dissertations for the degree of candidate of sciences, for the degree of doctor of sciences should be published]. URL: https://vak.minobrnauki.gov.ru/uploader/loader?type=19&name=91107547002&f=19537 (accessed: 17.07.2023). (In Russ.).
10. Inzhenernaya geometriya i komp'yuternaya grafika. Tsifrovaya podderzhka zhiznennogo tsikla izdeliy: Pasport nauchnoy spetsial'nosti 2.5.1 [Engineering geometry and computer graphics. Digital support of product life cycle: Passport of scientific specialty 2.5.1]. URL: https://www.nngasu.ru/science/dissertation_advice/2.5.1.pdf (accessed: 10.05.2023). (In Russ.).
Review
For citations:
Rotkov S.I., Konopatskiy E.V., Panchuk K.L. The problem of reduction of geometry and graphic training departments in Russian universities. Omsk Scientific Bulletin. 2023;(4):29-37. (In Russ.) https://doi.org/10.25206/1813-8225-2023-188-29-37. EDN: WKFUZV
Views:
14
JATS XML
Email this article 