Ways to increase the durability of machines and mechanisms
https://doi.org/10.25206/1813-8225-2023-187-39-44
EDN: BXXKJI
Abstract
The article deals with the issues of increasing the durability of machines and mechanisms at various stages of the product life cycle. The components on which the durability of equipment. The requirements for the anode materials, the composition of the working fluid, the test results for the implementation of the reparation technology are given. The results of the developed and patented technology for increasing the durability of tribosystem parts are presented, new compositions of working fluids are obtained to implement the method of repair and processing of parts at the manufacturing stage, new devices are developed, manufactured and tested under operating conditions that increase the life of parts at various stages of the product life cycle, new stands for testing of developed technologies. The developed methods, arrangements of machine and mechanism units, which allow to implement wear compensation during operation, provide a significant (1,5–3 times) increase in the resource.
About the Authors
N. G. Makarenko
Military Innovative Technopolis «ERA»
Russian Federation
Russian Federation
MAKARENKO Nikolay Grigoryevich, Candidate of Technical Sciences, Associate Professor, Senior Researcher of Research (Experimental Research and Testing) Department
Anapa
Yu. S. Yakovleva
Military Innovative Technopolis «ERA»
Russian Federation
Russian Federation
YAKOVLEVA Yuliya Sergeevna, Researcher of Research (Experimental Research and Testing) Department
Anapa
O. A. Mikhalevich
Military Innovative Technopolis «ERA»
Russian Federation
Russian Federation
MIKHALEVICH Oleg Alekseyevich, Candidate of Technical Sciences, Associate Professor, Senior Researcher of Research (Experimental Research and Testing) Department
Anapa
References
1. Shargayev A. A., Makarenko N. G., Mamey S. A. [i dr.]. Metodika povysheniya dolgovechnosti opor kacheniya dvigatelya vnutrennego sgoraniya elektrokhimikomekhanicheskoy obrabotkoy [Durability improvement of rolling-contact bearings in internal combustion engine by electrochemical and mechanical processing] // Omskiy nauchnyy vestnik. Omsk Scientific Bulletin. 2017. no. 6 (156). P. 36–40. (In Russ.).
2. Ryzhkin A. A., Shuchev K. G., Fominov E. V. Trudy Yuzhnogo nauchnogo tsentra Rossiyskoy akademii nauk. T. 2. Fizika. Mekhanika. Tekhnika [Studies of the Southern scientific center of the Russian academy of science. Vol. 2. Physics. Mechanics. Technic] / ed. by G. G. Matishov. Rostov-on-Don, 2007. 344 p. ISBN 978-5-902982-19-7. (In Russ.).
3. Chulkin S. G., Alekseev S. P., Breki A. D., Gvozdev A. E. Snizheniye iznosa i energeticheskikh poter’ na treniye v oborudovanii mekhanicheskoy obrabotki posredstvom primeneniya konsistentnykh smazochnykh materialov [Reduction of wear and friction energy losses in mechanical processing equipment through the use of greases]. Tula, 2019. 194 p. ISBN 978-5-7679-4394-4. (In Russ.).
4. Breki A. D., Gvozdev A. E., Kolmakov A. G. Ispol’zovaniye obobshchennogo treugol’nika Paskalya dlya opisaniya kolebaniy sily treniya materialov [Use of generalized Pascal pyramid for fluctuation description of friction force of materials] // Materialovedeniye. Materials Science. 2016. No. 11. P. 3–8. EDN WZRDIJ. (In Russ.).
5. Breki A. D., Chulkin S. G., Gvozdev A. E. [et al.]. Obobshchennaya matematicheskaya model’ vneshnego treniya skol’zheniya tverdykh tel [Generalized mathematical model of external sliding friction of solids] // Materialovedeniye. Materials Science. 2021. No. 10. P. 44–48. DOI: 10.31044/1684-579X-20210-10-44-48. EDN HXVMDA. (In Russ.).
6. Breki A. D., Chulkin S. G., Gvozdev A. E. [et al.]. Zakonomernosti treniya skol’zheniya stali R6M5 po stali 45 v srede smazochnogo materiala Litol-24 s dispersnymi chastitsami [Regularities of sliding friction of steel r6m5 on steel 45 in environment of Litol-24 lubricant with dispersed graphite particles] // Deformatsiya i razrusheniye. Deformation and Fracture of Materials. 2021. No. 10. P. 28–34. DOI: 10.31044/1814-4632-202110-28-34. EDN XGVNTU. (In Russ.).
7. Yakhimovich V. A., Breki A. D., Alkhimenko A. A. [et al.]. Metodika issledovaniya iznosa rez’by buril’nykh trub pri mnogokratnom svinchivanii i vyderzhke pod nagruzkoy [Methodology for studying the wear of drill pipe threads during repeated making up and holding under load] // Izvestiya YugoZapadnogo gosudarstvennogo universiteta. Proceedings of Southwest State University. 2020. Vol. 24, no. 3. P. 8–20. DOI: 10.21869/2223-1560-2020-24-3-8-20. (In Russ.).
8. Computer Program 2018664179 Russian Federation. Programmnyy kompleks dlya rascheta napryazhennogo i deformirovannogo sostoyaniya metallicheskikh, poroshkovykh, amorfnykh, nemetallicheskikh, nanostrukturnykh kompozitsionnykh sistem i materialov konstruktsionnogo, instrumental’nogo i tribotekhnicheskogo naznacheniya v razlichnykh usloviyakh [Software package for calculating the stressed and deformed state of metallic, powdered, amorphous, non-metallic, nanostructured composite systems and materials for structural, instrumental and tribotechnical purposes in various conditions] / Gvozdev A. E., Zhuravlev G. M., Minayev I. V. [et al.]. No. 2018660758. (In Russ.).
9. Patent 2694683 Russian Federation, IPC F 02 D 17/04. Elektrolit dlya elektrokhimikomekhanicheskogo uprochneniya staley [Electrolyte for electrochemical mechanical hardening of steel] / Makarenko N. G., Shargayev A. A., Vinnik A. I. [et al.]. No. 2017102818. (In Russ.).
10. Patent 181414 Russian Federation, IPC F 16 C 41/02. Ustroystvo dlya prirabotki i povysheniya dolgovechnosti podshipnika kacheniya [A device for running-in and increasing the durability of a rolling bearing] / Makarenko N. G., Shargaev A. A. [et al.]. No. 2017127866. (In Russ.).
11. Patent 2554236 Russian Federation, IPC В 24 С 7/00. Sposob bezrazbornogo vosstanovleniya trushchikhsya sopryazheniy dvigatelya dizel’-generatornoy ustanovki lokomotiva [A method of non-disassembly restoration of rubbing interfaces of the engine of a diesel generator set of a locomotive] / Makaren- ko N. G., Voychak S. A. No. 2013141964. (In Russ.).
Review
For citations:
Makarenko N.G., Yakovleva Yu.S., Mikhalevich O.A. Ways to increase the durability of machines and mechanisms. Omsk Scientific Bulletin. 2023;(3):39-44. (In Russ.) https://doi.org/10.25206/1813-8225-2023-187-39-44. EDN: BXXKJI
Views:
4
JATS XML
Email this article 