The analysis of the effect of heat treatment in various atmospheres on the structure of titanium foil
https://doi.org/10.25206/1813-8225-2024-189-35-40
EDN: OAGRAU
Abstract
The structure and elemental composition of titanium foil annealed in an inert ambient in the presence of hydrocarbons are studied by optical microscopy and scanning electron microscopy. The heat treatments carried out are simulated the synthesis process of multi-walled carbon nanotubes. As a result of the treatments, the plasticity of the material under study is significantly reduced. It is shown that the structure of the foil changes as a result of annealing. With an increase in the annealing temperature, an increase in carbon and oxygen concentrations is observed, and the hardness of the material increases significantly, which is probably due to the formation of titanium oxide and titanium carbide in the foil structure.
Keywords
Supporting agencies: The work is carried out within the framework of the «Priority 2030» program. The equipment of the Scientific and Educational Resource Centre of Omsk State Technical University «Nanotechnologies» is used in the work.
About the Authors
E. V. Knyazev
Омский научный центр СО РАН; Омский государственный технический университет
Russian Federation
Russian Federation
Knyazev Egor Vladimirovich, Candidate of Technical Sciences, Researcher; Associate Professor of Mechanical Engineering and Materials Science Department, Mechanical Engineering Institute
AuthorID (RSCI): 666119
AuthorID (SCOPUS): 55657278600
ResearcherID: AAU-4486-2020
Omsk
A. M. Badamshin
Омский государственный технический университет
Russian Federation
Russian Federation
Badamshin Artem Maratovich, Senior Lecturer of Mechanical Engineering and Materials Science Department, Mechanical Engineering Institute
AuthorID (RSCI): 1032513
AuthorID (SCOPUS): 57211271253
ResearcherID: AAA-3846-2019
Omsk
Yu. A. Stenkin
Омский научный центр СО РАН
Russian Federation
Russian Federation
Stenkin Yuriy Alekseyevich, Candidate of Chemical Sciences, Researcher
AuthorID (RSCI): 150801
AuthorID (SCOPUS): 19639375100
ResearcherID: AAN-1001-2021
Omsk
E. A. Rogachev
Омский государственный технический университет
Russian Federation
Russian Federation
Rogachev Evgeniy Anatolyevich, Candidate of Technical Sciences, Associate Professor, Director of the Scientific and Educational Resource Centre for Nanotechnologies «Nanocentre», Associate Professor of Physics Department
AuthorID (RSCI): 670217
AuthorID (SCOPUS): 56503848300
ResearcherID: AAS-1459-2020
Omsk
References
1. Mikheyev K. G., Syugayev A. V., Zonov R. G. [et al.]. Lazerno-indutsirovannyy grafen i ego modifikatsiya polipirrolom dlya uvelicheniya emkosti mikrosuperkondensatora [Laser-induced graphene and its modification with polypyrrole for increasing microsupercapacitor capacitance] // Fizika tverdogo tela. Physics of the Solid State. 2023. Vol. 65, no. 2. P. 347–354. DOI: 10.21883/FTT.2023.02.54313.529. (In Russ.).
2. Muzaffar A., Ahamed M. B., Deshmukh K. [et al.]. A review on recent advances in hybrid supercapacitors: Design, fabrication and applications // Renewable and Sustainable Energy Reviews. 2019. Vol. 101. P. 123–145. DOI: 10.1016/j.rser.2018.10.026. (In Engl.).
3. Palchoudhury S., Ramasamy K., Ram K. Gupta [et al.]. Flexible Supercapacitors: A Materials Perspective // Frontiers in Materials. 2019. Vol. 5. 83. DOI: 10.3389/fmats.2018.00083. (In Engl.).
4. Lobov I. A., Davletkil’deyev N. A., Nesov S. N. [et al.]. Struktura mezhfaznoy granitsy polianilin-uglerodnaya nanotrubka [Structure of the polyaniline−carbon nanotube interface] // Pis’ma v ZhTF. Technical Physics Letters. 2022. Vol. 48, no. 12. P. 7–10. DOI: 10.21883/PJTF.2022.12.52670.19193. (In Russ.).
5. Lu X., Li F., Steimecke M. [et al.]. Titanium as a Substrate for Three-Dimensional Hybrid Electrodes for Vanadium Redox Flow Battery Applications // ChemElectroChem. 2020. Vol. 7. P. 737–744. DOI: 10.1002/celc.201901896. (In Engl.).
6. Szabó A., Andricevic P., Pápa Z. [et al.]. Growth of CNT Forests on Titanium Based Layers, Detailed Study of Catalysts // Frontiers in Materials. 2018. Vol. 6. 593. DOI: 10.3389/fchem.2018.00593. (In Engl.).
7. Kazachenok M. S., Panin A. V., Ivanov Yu. F. [i dr.]. Vliyaniye termicheskogo otzhiga na mekhanicheskoye povedeniye tekhnicheskogo titana VT1-0, imeyushchego submikrokristallicheskuyu strukturu v poverkhnostnom sloye ili v ob”yeme materiala [Effect of thermal annealing on the mechanical behavior on commercial titanium VT1-0 with submicrocristalline structure in the surface layer or material bulk] // Fizicheskaya mezomekhanika. Physical Mesomechanics. 2005. Vol. 8, no. 4. P. 37–47. (In Russ.).
8. Spivak L. V., Shchepina N. E. Osobennosti polimorfnogo prevrashcheniya v titane [Features of polymorphic transformation in titanium] // Zhurnal tekhnicheskoy fiziki. Technical Physics. 2021. Vol. 91, no. 8. P. 1233–1238. DOI: 10.21883/JTF.2021.08.51096.53-21s. (In Russ.).
9. Lopatin N. V., D’yakonov G. S., Zherebtsov S. V. [et al.]. Struktura i mekhanicheskiye svoystva nanostrukturnogo lista iz titana VT1-0, poluchennogo kholodnoy prokatkoy [Structure and mechanical properties of nanostructured sheet of titanium VT1-0 produced by cold rolling] // Nauchnyye vedomosti. Seriya Matematika. Fizika. Scientific Bulletin of Belgorod State University. Series: Mathematics. Physics. 2010. Vol. 82, no. 11. P. 69–77. (In Russ.).
10. Gryaznov M. Yu., Shotin S. V., Chuvil’deyev V. N. [et al.]. Uluchsheniye fiziko-mekhanicheskikh kharakteristik nelegirovannogo titana VT1-0 i issledovaniye vliyaniya na nikh rezhimov selektivnogo lazernogo splavleniya [Improving the physical and mechanical characteristics of unalloyed titanium VT1-0 and studying the effect of selective laser melting parameters] // Zhurnal tekhnicheskoy fiziki. Technical Physics. 2023. Vol. 93, no. 2. P. 241–248. DOI: 10.21883/JTF.2023.02.54499.209-22. (In Russ.).
11. Bulkov A. B., Peshkov V. V., Selivanov V. F. [et al.]. Kinetika rosta gazonasyshchennykh (okhrupchennykh) sloyev na titane pri vakuumnom otzhige [Kinetics of growth of gas-saturated (embroken) layers on titanium at vacuum annealing] // Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta. Bulletin of Voronezh State Technical University. 2020. Vol. 16, no. 2. P. 142–148. DOI: 10.25987/VSTU.2020.16.2.019. (In Russ.).
12. Youngprasert B., Poochinda K., Ngamprasertsith S. Treatment of Acetonitrile by Catalytic Supercritical Water Oxidation in Compact-Sized Reactor // J. Water Resource and Protection. 2010. Vol. 2. P. 222–226. DOI: 10.4236/jwarp.2010.23025. (In Engl.).
13. Tan Y., Xu L., Xu Z. [et al.]. Effects of Ti foil thickness on microstructures and mechanical properties of in situ synthesized micro-laminated TiC/Ti composites // Materials Science & Engineering A. 2019. Vol. 767. 138296. DOI: 10.1016/j.msea.2019.138296. (In Engl.).
14. Wang N., Choi Y., Oue K. [et al.]. Fabrication of in-situ rod-like TiC particles dispersed Ti matrix composite using graphite power sheet // Scientific Reports. 2022. Vol. 12. 19154. DOI: 10.1038/s41598-022-23796-4. (In Engl.).
Review
For citations:
Knyazev EV, Badamshin AM, Stenkin YA, Rogachev EA. The analysis of the effect of heat treatment in various atmospheres on the structure of titanium foil. Omsk Scientific Bulletin. 2024;(1):35-40. (In Russ.) https://doi.org/10.25206/1813-8225-2024-189-35-40. EDN: OAGRAU
Views:
30
JATS XML
Email this article 