Study of elastoplastic deformations in the dynamic interaction of two rigid deformable bodies
https://doi.org/10.25206/1813-8225-2026-197-15-22
EDN: TTVFLD
Abstract
The article is a continuation of the study of dynamic dependencies between force and depth of introduction of conical indenters into barriers. The indenter is a cylinder with a pointed conical part. Indenters and barriers are made of steel. As a result of digitization of graphs of investigated dependencies, interpolation formulas of distribution of energies of elastic and plastic deformations in contact zone are obtained. Unlike the previous publication, which considered three variants of the angle of sharpening of the conical head part of the indenter, in this work the range of change of these angles is significantly increased.
The obtained results can be used in the design of composite many rod punches and matrices for pressure treatment of sheet materials, as well as in the development of power and geometric parameters of impact tools for hydromolots.
About the Author
D. I. Chernyavsky
Omsk State Technical University
Russian Federation
Russian Federation
Chernyavsky Dmitry Ivanovich, Doctor of Technical Sciences, Associate Professor, Professor of the Mechanical Engineering Department,
11, Mira Ave., Omsk, 644050.
AuthorID (RCSI): 473365.
AuthorID (SCOPUS): 6506002416.
ResearcherID: N-2038-2015.
References
1. Ayzikovich S. M., Aleksandrov V. M., Argatov I. I. [et al.]. Mekhanika kontaktnykh vzaimodeystviy [Mechanics of contact interactions]. Moscow, 2001. 670 p. ISBN 5-9221-0154-4. EDN: RIVBHQ. (In Russ.).
2. Zukas D. A., Nikolas T., Svift Kh. F. [et al.]. Dinamika udara [Impact dynamics]. Moscow, 1985. 296 p. (In Russ.).
3. Ishlinskiy A. Yu., Ivlev D. D. Matematicheskaya teoriya plastichnosti [Mathematical theory of plasticity]. Moscow, 2001. 704 p. ISBN 5-9221-0141-2. EDN: TQYAQT. (In Russ.).
4. Lysov M. I., Sosov N. V. Formoobrazovaniye detaley gibkoy [Shaping of flexible parts]. Moscow, 2001. 388 p. ISBN 5-21703105-0. (In Russ.).
5. Shemyakin E. I. Dinamicheskiye zadachi teorii uprugosti i plastichnosti [Dynamic problems of the theory of elasticity and plasticity]. 2nd ed., expanded and revised. Moscow, 2007. EDN: QJRTET. (In Russ.).
6. Timoshenko S. P., Gud’yer Dzh. Teoriya uprugosti [Theory of elasticity] / trans. from Engl. M. I. Reytman / Ed. by G. S. Shapiro. Moscow, 1975. 576 p. (In Russ.).
7. Нerz Н. Gesammelte Werke. Band 1. Schriften vermischten inhalts. Leipzig: Johann Ambrosius Barth, 1895. S. 155.
8. Timoshenko S. P., Gud’yer Dzh. Teoriya uprugosti [Theory of elasticity] / trans. from Engl. M. I. Reytman; ed. by G. S. Shapiro. Moscow, 1975. 576 p. (In Russ).
9. Upendra K., Akhil U. Buckling load prediction of laminated composite stiffened panels subjected to in-plane shear using ANN. International Journal of Composites Science and Technology. 2007. Vol. 102. P. 158–164. DOI: 10.1016/j.tws.2016.01.025.
10. Atkins A. G., Tabor D. Plastic indentation in metals with cones. Journal of the Mechanics and Physics of Solids. 1965. Vol. 13. P. 149–164. DOI: 10.1016/0022-5096(65)90018-9.
11. Backman M., Goldsmith W. The mechanics of penetration of projectiles into targets. International Journal of Engineering Science. 1978. Vol. 16. P. 1–99. DOI: 10.1016/0020-7225(78)90002-2.
12. Stilwell N. A., Tabor D. Elastic recovery of conical indentation. Proceedings of the Physical Society. 1961. Vol. 78. P. 169–179. DOI: 10.1088/0370-1328/78/2/302.
13. Goldsmith W., Wu W. Response of rocks to impact loading by bars with pointed ends. Rock Mechanics. 1981. Vol. 13. P. 157–184. DOI: 10.1007/BF01239036.
14. Beskopylny A., Veremeenko A., Kadomtseva E., Shi- lov A. Dynamic response of a plate laying on elastic base during the impact of f conical indenter. MATEC Web of Conferences. 2018. Vol. 196. P. 01001. DOI: 10.1051/matecconf/201819601001.
15. Ganneau F., Constantinides G., Ulm F.-J. Dual-indentation technique for the assessment of strength properties of cohesivefrictional materials. International Journal of Solids and Structures. 2006. Vol. 43. P. 1727–1745. DOI: 10.1016/j.ijsolstr.2005.03.035.
16. Lockett F. J. Indentation of a rigid plastic material by a conical indenter. Journal of the Mechanics and Physics of Solids. 1963. Vol. 11. P. 345–355. DOI: 10.1016/0022-5096(63)90035-8.
17. Goldsmith W., Yew C.-H. Penetration of Conical indenters into plane metal surfaces. Proceedings of the 4th U. S. National Congress of Appllied Mechanics. 1962. Vol. 1. P. 177–188.
18. Tang W. The penetration of conical indenters with hemispherical tips into plane metal surfaces: Thesis (M.S.). University of California. Berkeley, 1962.
19. Chernyavsky D. I., Gapon D. D. The relationship between the laws of conservation of energy and momentum for low speed impact of several bodies. Journal of Applied Nonlinear Dynamics. 2020. Vol. 9, no. 2. P. 259–271. DOI: 10.5890/JAND.2020.06.008.
20. Johnson K. L. Contact mechanics. University of Cambridge, Cambridge University Press, 1985. 462 p. DOI: 10.1017/CBO9781139171731.
21. Chernyavskiy D. I. Issledovaniye uprugoplasticheskikh deformatsiy pri staticheskom i dinamicheskom vzaimodeystvii dvukh tverdykh deformiruyemykh tel. Indentor imeyet konicheskuyu golovnuyu chast’ [Study of elastoplastic deformations at static and dynamic interaction of two solid deformable bodies. Indenter has conical head part]. Omskiy nauchnyy vestnik. Omsk Scientific Bulletin. 2025. No. 2 (194). P. 5–17. DOI: 10.25206/1813-8225-2025-194-5-17. EDN: JXBIZZ. (In Russ.).
Review
For citations:
Chernyavsky DI. Study of elastoplastic deformations in the dynamic interaction of two rigid deformable bodies. Omsk Scientific Bulletin. 2026;(1):15-22. (In Russ.) https://doi.org/10.25206/1813-8225-2026-197-15-22. EDN: TTVFLD
Views:
97
JATS XML
Email this article 