Applying lean manufacturing practices to improve process control in a chemical plant
https://doi.org/10.25206/1813-8225-2023-187-60-67
EDN: HUKLBB
Abstract
This article discusses lean manufacturing methods aimed at improving the management of production processes in a chemical plant. The object of the study is the concept of lean production, the subject is the use of its methods in the production of low fission polyethylene in the public joint-stock company Kazanorgsintez.
The article provides a brief overview of the methods and tools of lean manufacturing, which are most widely used in Russian industrial enterprises. Based on the example of low-density polyethylene production in Kazanorgsintez Public Joint-Stock Company, recommendations have been developed on the use of lean manufacturing methods to optimize production processes, in particular, the Just-inTime principle, which is implemented through the use of the automated KANBAN system (at the stage of production of low-density polyethylene) and the "pull" model (on the example of low-density polyethylene storage). As a result of the study, the prospects for the introduction of methods and tools of lean production at a chemical enterprise are shown.
About the Authors
M. O. Shalnev
Kazan National Research Technological University
Russian Federation
Russian Federation
SHALNEV Maksim Olegovich, Undergraduate of Analytical Chemistry, Certification and Quality Management Department
Kazan
Ya. V. Denisova
Kazan National Research Technological University
Russian Federation
Russian Federation
DENISOVA Yana Vladimirovna, Candidate of Economic Sciences, Associate Professor of Analytical Chemistry, Certification and Quality Management Department
Kazan
AuthorID (RSCI): 973897
References
1. Belysh K. V. Organizatsiya berezhlivogo proizvodstva na promyshlennykh predpriyatiyakh [Organization of lean production at industrial enterprises] // Lin-tekhnologii: Berezhlivoye proizvodstvo. Lean Technology: Lean Manufacturing. 2018. No. 5. (In Russ.).
2. Miroshnichenko M. A., Goloborod’ko E. O., Sarycheva I. N. Metodologiya effektivnogo upravleniya na osnove printsipov berezhlivogo proizvodstva [Effective management methodology based on the principles of lean manufacturing] // Vestnik Akademii znaniy. Bulletin of the Academy of Knowledge. 2020. No. 2 (37). P. 179–183. DOI: 10.24411/2304-6139-2020-10161. (In Russ.).
3. Prosvirina N. V., Tikhonov A. I. Osobennosti upravleniya proizvodstvennym protsessom promyshlennogo predpriyatiya na osnove kontseptsii berezhlivogo proizvodstva [Features of managing the production process of an industrial enterprise based on the concept of lean manufacturing] // Moskovskiy ekonomicheskiy zhurnal. Moscow Economic Journal. 2019. No. 11. DOI: 10.24411/2413-046X-2019-10152. (In Russ.).
4. PAO «Kazan’orgsintez» [PJSC «Kazanorgsintez»]. URL: https://kazanorgsintez.ru (accessed: 02.04.2023). (In Russ.).
5. Godovoy otchet [Annual report] // PAO «Kazan’orgsintez». PJSC «Kazanorgsintez» / F. G. Minigulov. 2021. P. 1–91. (In Russ.).
6. Seliverstov A. S., Postnov V. V., Lukina V. V. Sistema 5S kak metod povysheniya effektivnosti deyatel’nosti predpriyatiya [5S system as a method of increasing the efficiency of the enterprise ] // Molodoy uchenyy. Young Scientist. 2020. No. 42 (332). P. 132–134. (In Russ.).
7. GOST R 56407-2015. Berezhlivoye proizvodstvo. Osnovnyye metody i instrumenty [Lean production. Basic methods and tools]. URL: http://docs.cntd.ru/document/1200120649 (accessed: 13.02.2023). (In Russ.).
8. Protsess standartizatsii raboty v organizatsii: kak i zachem [The process of standardization of work in the organization: how and why]. URL: http://arprime.ru/avtomatizacia/standartizatsiyaraboty-deyatelnosti-i-protsessov-proizvodstva (accessed: 18.02. 2023). (In Russ.).
9. Vasilyeva S. E., Danilova S. Yu. Metodika vnedreniya instrumenta berezhlivogo proizvodstva 5S [Methodology for implementing the 5S lean manufacturing tool] // Molodoy uchenyy. Young Scientist. 2016. No. 13 (117). P. 388–393. (In Russ.).
10. Visualization — tvorcheskiy sposob primeneniya Lean [Visualization is a creative way to apply Lean]. URL: https:// worksection.com/blog/visualization-lean.html (accessed: 24.02.2023). (In Russ.).
11. Ivanova T. Poka-eke kak metod ustraneniya skrytykh poter’ na predpriyatii [Poka-yoke as solution to eliminate hidden losses on enterprise] // Problemy ekonomiki i menedzhmenta. Problems of Economics and Management. 2014. No. 7 (35). P. 33–35. (In Russ.).
12. Stepanova K. M., Sushchev A. K. Organizatsiya obsluzhivaniya oborudovaniya po metodu TPM v proizvodstve avtokomponentov [Organization of equipment service by TRM method in manufacturing autocomponents] // Sovremennyye materialy, tekhnika i tekhnologii. Modern Materials, Equipment and Technologies. 2018. No. 1 (16). P. 72–77. (In Russ.).
13. Kanban: kratkoye rukovodstvo [Kanban: a quick guide]. URL: https://coderlessons.com/tutorials/upravlenie/vyuchit-kan-ban/kanban-kratkoe-rukovodstvo (accessed: 04.03.2023). (In Russ.).
14. Nedbaylyuk B. E., Antonova I. I., Antonov S. A. [et al.]. Metody berezhlivogo proizvodstva v nepreryvnykh proizvodstvennykh protsessakh [Methods of frugal production in ceaseless production processes] // Aktual’nyye problemy ekonomiki i prava. Actual Problems of Economics and Law. 2011. No. 1 (17). P. 102–110. (In Russ.).
15. Kotlyar E. V., Pushkareva E. M. Sistema upravleniya proyektami KANBAN [KANBAN project management system] // Biznes-obrazovaniye v ekonomike znaniy. Business Education in the Knowledge Economy. 2020. No. 1 (15). P. 57–59. (In Russ.).
16. Denisova Ya. V., Petrova A. S., Sopin V. F. Optimizatsiya proizvodstvennogo protsessa putem vnedreniya metodov berezhlivogo proizvodstva [Optimization of the production process through the introduction of lean production methods] // Vestnik Voronezhskogo gosudarstvennogo universiteta inzhenernykh tekhnologiy. Proceedings of the Voronezh State University of Engineering Technologies. 2022. Vol. 84, no. 2. P. 315–323. DOI: 10.20914/2310-1202-2022-2-315-323. (In Russ.).
17. Vehjder M. Instrumenty berezhlivogo proizvodstva: karmannoye rukovodstvo po praktike primeneniya Lean [Lean tools] / trans. from Engl. Moscow, 2005. P. 86–87. (In Russ.).
18. Roter M. Toyota Kata: liderstvo, menedzhment i razvitiye sotrudnikov dlya dostizheniya vydayushchikhsya rezultatov [Toyota Kata: Managing People for Improvement, Adaptiveness and Superior Results] / trans. from Engl. M. Samsonova. Saint Petersburg, 2014. 304 p. (In Russ.).
19. Andersen B. Biznes-protsessy. Instrumenty sovershenstvovaniya [Business Process. Improvement Toolbox]. Moscow, 2003. 272 p. (In Russ.).
Review
For citations:
Shalnev M.O., Denisova Ya.V. Applying lean manufacturing practices to improve process control in a chemical plant. Omsk Scientific Bulletin. 2023;(3):60-67. (In Russ.) https://doi.org/10.25206/1813-8225-2023-187-60-67. EDN: HUKLBB
Views:
6
JATS XML
Email this article 